Appleton’s ATX control stations are available in a wide range of materials that are impact and corrosion resistant. They are user friendly, easy to install and easy to reconfigure in the field, with operators that can be DIN Rail or panel-mounted. They are made to keep your machinery and the workers using them safe now and for years into the future.

Unicode2 Series
Polyamide Control Stations – Increased Safety
		Polyamide, black finish Stainless steel cover screws Polyamide cable gland and blanking plug
Zone 1 & 2 – 21 & 22 ATEX II 2 GD IEC CE
Ex de IIC / Ex demb IIC T6 Ex tD A21 T75°C IP66 – IK09
>> Read Technical Datasheet
Polyester Control Stations – Increased Safety
		Fiberglass reinforced polyester, black finish Stainless steel cover screws Polyamide cable gland and blanking plug
Zone 1 & 2 – 21 & 22 ATEX II 2 GD IECEx CE
Ex de IIC / Ex demb IIC T6 Ex tD A21 T75°C IP66 - IK10
>> Read Technical Datasheet
Stainless Steel Control Stations – Increased Safety
		316L stainless steel, natural finish Stainless steel cover screws Polyamide cable gland and blanking plug
Zone 1 & 2 – 21 & 22 ATEX II 2 GD IEC CE
Ex de IIC / Ex demb IIC T6 to T5 Ex tD A21 T80°C to T95°C IP66 – IK10
>> Read Technical Datasheet
Aluminum Control Stations – Increased Safety
		Aluminum gray epoxy powder coated Stainless steel cover screws Polyamide cable gland and blanking plug
Zone 1 & 2 – 21 & 22 ATEX II 2 GD IEC CE
Ex de IIC / Ex demb IIC T6 Ex tD A21 T80°C IP66 – IK10
>> Read Technical Datasheet
General Features		Applications
Voltage and Amperage: Up to 500V/16A Pilot Light Voltage: 12-254Vac 50/60Hz and 12-60Vdc Employs Ex de (factory sealed) operators including push buttons, illuminated push buttons, selector switches, control and load break switches, contact blocks, pilot lights (LED), and terminal blocks Pilot light employs high intensity single LED with lifetime of 100,000 hours Enclosures are rated for IP66 with firmly secured gasket Operators and contact blocks are spaced so as to have easy and ample space for wiring Wide selection of cable glands, union adapter entries at top and bottom locations Choice of DIN rail mounted high performance contact block suitable for low intensity (less than 5mA) TS35 rail mounted components held securely in place during operation and easily removed for service Brass Inserts are provided for TS35 DIN rails or mounting plate to be installed inside the enclosure Captive, corrosion resistant stainless steel cover screws		Local control stations and motor control stations for use in hazardous areas covering the broadest possible range of applications. Control of equipment at power plants, chemical and petrochemical plants, petroleum refineries, reverse osmosis plants, pulp and paper processing plants and various industrial applications. Push buttons and selector switches are used in conjunction with contactors or magnetic starters for remote control of motors in hazardous locations. They provide circuit control and/or selection. Pilot lights provide visual assurance that an electrical function is being performed at a remote or hazardous location. For use in wash down areas.
Accessories		Options
Key for changing actuator blocks Guard for mushroom head actuator Padlockable guard M5 earth stud Combination drain and breather available in brass, polyamide and stainless steel		Nameplates: Lamacoid with different color combinations. Stainless steel Padlocking facility at left, center, right or any position on selector switches Padlocking facility for momentary and maintained push buttons Special contact arrangements available upon request