Welcome to Delta Sensor's Website

Delta Sensor

Temperature Experts
Instrumentation Solutions
Customized Services

Welcome Guest!

Products

Services

Industries

Documentation Center

Local Support

Representations

Thermocouples Colour Codes

ATX Guide for Hazardous Zones

On-Line Foods Gauge

...Performance Which is Trusted for Control

		MM710e

		The MM710e uses precision NIR (near infrared) measurement technology to make a continuous single or multi-component non-contacting measurement of parameters such as:
		Moisture Fat Protein Temperature
		With a measurement speed of 7.5 milliseconds, the patented “light engine” uses optical components manufactured by NDC’s Optics division, to delivers the highest resolution on-line measurements available today. The MM710e is designed for incorporation into closed-loop control systems.
		Connectivity options include Digital, Analogue, Industrial Ethernet and Fieldbus. Using industry-standard Ethernet communication hardware such as hubs, cables, repeaters and routers, installation and integration of the modular MM710e gauging system is straightforward. For network integration, the Gauge can be configured for the following industrial Ethernet protocols:
		EtherNet IP PROFINET Modbus/TCP
Series 710e Peripheral Devices are available to connect to the gauges via standard Cat5E cable, including:		If Fieldbus connectivity is required, the OWS, HMI and User Port can be supplied with Network Gateways for: PROFIBUS DP, DeviceNet and CANbus Open.
Operator Workstation (OWS) Human Machine Interface (HMI) User Port Switched Network Hub		For simplicity and convenience, all MM710e system components run on 24V DC, either from an on-site supply or from an NDC in-line 24V universal power supply. Long term stability, industry-best performance, low installation costs and no routine maintenance requirements guarantee the lowest cost of ownership over the MM710e’s many years of service.
The OWS provides operator-level interaction with an individual gauge; the HMI provides supervisory access to up to 16 networked MM710e gauges. Both units feature high definition multi-lingual colour touch screen displays. The User Port provides additional analogue outputs and digital I/O for any connected gauge.		>> Read Technical Datasheet


PowderVision Sampling System		Gauge Tools XL Software



NDC Series 710e Gauges are designed to make a non-contacting measurement with the product. Ideally they are installed over a moving transport conveyor at a point in the line where the moisture is representative for control.		Every Series 710e Gauge from NDC Infrared Engineering is supplied ready to use for the application and measurement ranges our customer requires. Each gauge contains a measurement algorithm or formula which makes the gauge respond in a proportional and linear way to changes in the measured parameter.
In some locations, however, products are transported in pneumatic or garvity-fed ducts and in order to gain access to the product to make a measurement, NDC has developed the PowderVision Sampling Systems.		The purpose of a 710e Gauge is to provide you with real-time measurements to laboratory accuracy, which agree as closely as possible with your laboratory or off-line reference method.
Available in two configurations, Standard and Heavy Duty, PowderVision samplers catch the falling product in a sampling cup, measure it, through a sapphire window, and then eject it. In the case of the Standard unit, ejection is by a jet of compressed air; the Heavy Duty Unit uses a pneumatically actuated sample cup which opens and closes. The frequency of the measurement cycle is adjusted depending on the rate of product flow. Frequent and representative sampling Integration of measurement outputs for process control Ease of installation		To facilitate this process, NDC provides GaugeToolsXLTM software which is packed with useful features to help our customers get the most out of their on-line measurement gauge from NDC - not just to achieve agreement with the laboratory. GaugeToolsXLTM provides the following seven tools: Simple Display Trend History Tool Linefit Calibration Logger Configuration Gauge Utility
		The display is fully user-configurable and you can save your workspace for future use. Connectivity options include: USB, Serial and Ethernet. Running GaugeToolsXLTM on one PC, you can communicate with all gauges connected to the same network.